FA EN
پرسا تجهیز ایرانیان
وارد کننده تجهیزات آزمایشگاهی و لوازم مصرفی
پرسا تجهیز ایرانیان

کوپن های خوردگی جوش داده شده

Welded Coupons

Corrosion rates can vary between welded and non-welded metals, therefore it is advisable to study the behavior of both conditions. Studies involve examination of the parent material, the heat-affected zone, the weld metal, and the interfaces between all metals involved. The surface effects produced by welding, heat-tint formation or oxidation, fluxing action of slag, and the deliquescence of slag can be important factors in the corrosion behavior of metals.

Ideally, the coupon used should be the same thickness and welded with the same welding process as the material used in the production equipment. Usually this is not practical so a representative sample must be studied.

Typical welding techniques used are Shielded Metal Arc (SMAW), Gas Tungsten Arc (GTAW), and GAS Metal Arc (GMAW). Specimens are ground smooth after welding, unless otherwise specified, so as to provide a uniform surface for microscopic investigation.

Welded coupons can be prepared with or without the use of filler metal. The autogenous weld is prepared without the use of filler metal. This type of weld is the most economical method. Autogenous welds are commonly used to evaluate corrosion rates of welded materials and the usage of these materials in corrosive environments. An autogenous weld is produced by GTAW and can be used to test material weldability and gas shield usage, and to set welding parameters.

Autogenous Weld Coupon

Notes:

  1. 120 grit standard finish unless otherwise specified.
  2. 1/8" nominal thickness
  3. Standard weld is autogenous weld across end (A.W.A.E.). Sanded after weld.

Bypass Piping Systems

Bypass Piping Systems پرسا تجهیز ایرانیان پرسا تجهیز ایرانیان با بهره گیری از توانایی و تجربه مدیران خود این امکان…

رک تست

رک تست پرسا تجهیز ایرانیان پرسا تجهیز ایرانیان با بهره گیری از توانایی و تجربه مدیران خود این امکان را…

کوپن خوردگی Elastomeric

کوپن خوردگی Elastomeric Elastomeric Coupons Metal Samples in conjunction with International Seal Co., Inc., and DuPont Dow Elastomers offers a…

کوپن خوردگی تحت فشار

کوپن خوردگی تحت فشار Stressed Coupons Stress corrosion cracking occurs when tensile stress combines with a corrosive environment to attack…

کوپن های خوردگی جوش داده شده

کوپن های خوردگی جوش داده شده Welded Coupons Corrosion rates can vary between welded and non-welded metals, therefore it is…

کوپن Biofilm

کوپن Biofilm Biofilm (Mesh) Coupons Bacteria and other microorganisms can be found in almost any process medium, from cooling water…

کوپن Scale

کوپن Scale Scale Coupons Scale coupons (or deposition coupons) provide a qualitative measure of relative deposition rates in industrial water…

کوپن خوردگی مخصوص سیستم با فشار بالا

کوپن خوردگی مخصوص سیستم با فشار بالا Corrosion Coupons for High Pressure Access Systems Corrosion coupons are generally used in…

عایق

عایق Insulators, Washers, and Spacers Metal Samples makes a variety of insulators, washers, and spacers used to isolate test specimens.…

نگه دارنده کوپن خوردگی سری HC

نگه دارنده کوپن خوردگی سری HC HC Series Coupon Holders for High Pressure (HP™ and MH™) Access Systems HC Series…

نگهدارنده کوپن قابل تنظیم RT4000

نگهدارنده کوپن قابل تنظیم کوپن RT4000 Model RT4000 Coupon Insertion SystemRetractable with Packing Gland Model RT4000 coupon insertion system is…

نگهدارنده کوپن قابل تنظیم SR3000

نگهدارنده کوپن قابل تنظیم کوپن SR3000 Model SR3000 Low Pressure Adjustable Coupon Insertion System Model SR3000 coupon insertion system is…

ثابت کننده کوپن سیلندری

ثابت کننده کوپن سیلندری Fixed (Pipe Plug) Coupon Holders for Cylindrical Coupons Metal Samples Corrosion Monitoring Systems carries a variety…

ثابت کننده کوپن خوردگی تخت

ثابت کننده کوپن خوردگی تخت Fixed (Pipe Plug) Coupon Holders for Flat (Strip) Coupons Metal Samples Corrosion Monitoring Systems carries…

نگهدارنده کوپن خوردگی

نگهدارنده کوپن خوردگی Metal Samples offers a large variety of coupon holders to fit most standard applications. Additionally, we can…

کوپن خوردگی سیلندری

The list below represents our most common options. Many other sizes, alloys, and options are available. Please contact your Metal…

کوپن خوردگی گرد

کوپن خوردگی گرد The list below represents our most common options. Many other sizes, alloys, and options are available. Please…

کوپن خوردگی تخت - نواری

The list below represents our most common options. Many other sizes, alloys, and options are available. Please contact your Metal…

کوپن خوردگی

کوپن خوردگی انواع کوپن خوردگی تخت - نواری , گرد ,‌سیلندری , Scale , ‌Biofilm , Elastomeric , جوش داده…
© 2018 Porsa Tajhiz Iranian. All Rights Reserved.