نگهدارنده کوپن قابل تنظیم کوپن SR3000
Model SR3000
Low Pressure Adjustable Coupon Insertion System
Model SR3000 coupon insertion system is an adjustable unit commonly used in the water treating industry. The system is designed to mount onto a 1" piping system, but can easily be adapted to fit your specific requirements. The system consists of an insertion rod with a coupon adapter. The standard assembly is available with 3/4" or 1" NPT threads on the mounting plug. A safety cable and safety nut are also provided to prevent blowout. Several coupon holders and lengths are available.
Note: Since the adjustable mounting plug on the SR3000 is not a packing gland, some system leakage may occur if retracted or inserted into a pressurized system. Therefore, this model is suggested for use only in non-hazardous systems.
*The insertion length (I.L.) shown here is based on a standard Metal Samples Corrosion Monitoring Systems part #CO118 coupon and may vary for other coupons depending on the coupon length and hole location.
| Std. Length | I.L. (Max) |
| 18" | 16.5" |
| 24" | 22.5" |
| 30" | 28.5" |
| 36" | 34.5" |
| 42" | 40.5" |
Specifications:
Probe Body - 316 Stainless Steel
Temperature Rating - 100° F
Pressure Rating - 125 PSI / 8.5 Bar (TFE ferrule) or 1500 PSI / 102 Bar (Metal ferrule)
Mounting - 1" Full Port Valve (Min.)
SR3000 Ordering Information
SR3000 Ordering Information
| Model | |||||
| SR32 | - Low Pressure Adjustable Coupon Insertion System with 3/4" NPT | ||||
| SR33 | - Low Pressure Adjustable Coupon Insertion System with 1" NPT | ||||
| ¦ | Insertion Rod & Mounting Material | ||||
| ¦ | 22 | - 316 | |||
| ¦ | 44 | - C276 | |||
| ¦ | ¦ | Coupon Options | |||
| ¦ | ¦ | 010 | - Fits P/N CO100 | ||
| ¦ | ¦ | 030 | - Fits P/N CO118 | ||
| ¦ | ¦ | ¦ | Length | ||
| ¦ | ¦ | ¦ | 18 | - 16.5 inches max. insertion length | |
| ¦ | ¦ | ¦ | 24 | - 22.5 inches max. insertion length | |
| ¦ | ¦ | ¦ | 30 | - 28.5 inches max. insertion length | |
| ¦ | ¦ | ¦ | 36 | - 34.5 inches max. insertion length | |
| ¦ | ¦ | ¦ | 42 | - 40.5 inches max. insertion length | |
| ¦ | ¦ | ¦ | ¦ | Coupon Adapter and Insulators | |
| ¦ | ¦ | ¦ | ¦ | 1 | - Coupon adapter same material as rod, Teflon® insulators |
| ¦ | ¦ | ¦ | ¦ | 2 | - Teflon® coupon adapter, Teflon® insulators |
| ¦ | ¦ | ¦ | ¦ | 4 | - Coupon adapter same material as rod, nylon insulators (standard) |
| ¦ | ¦ | ¦ | ¦ | 5 | - Nylon coupon adapter, nylon insulators |
| ¦ | ¦ | ¦ | ¦ | ¦ | |
| SR32 | 22 | 030 | 18 | 4 | Example of Probe Ordering # |
| For alloys, sizes, or other special requirements not listed, please contact our sales department. | |
| * Nozzles must be ordered separately. |